Precautions and maintenance of liquid silicone machine?

In order to prevent accidents in the production process, the injection machine should be checked before using the liquid silicone rubber machine. Check whether water or oil has entered the electrical control box. Do not turn on the transmitter if it is wet. Before turning on the appliance, it should be dried. Before operation, check whether the power supply voltage meets the standard. Check whether the emergency stop switch, front and rear door switches are normal, and whether the rotation direction of the motor and the oil pump is the same. Before using the liquid silicone injection molding machine, check whether the cooling pipe is unobstructed, and introduce the cooling water into the oil cooler and the cooling water jacket at the end of the cylinder. 2. In use: employees should be educated to use the liquid silicone machine in strict accordance with the usage specifications to avoid industrial accidents or machine damage due to human factors.

Maintenance after use: In order to make the injection molding machine inject qualified silicone products and maintain a long service life. The injection machine should be maintained after use. Maintenance and maintenance are as follows:

 (1. After spraying with this liquid silicone machine, it is important to pay attention to cleaning the liquid silicone in the injection machine. Because after use, there must be a lot of residual liquid silicone in the machine. If these residues are not cleaned, it will affect its next use. It should be noted that the residue left in it will affect the new silica gel. (2. In addition, the injection machine should regularly check whether its injection head is in good condition when using it. If the injection head fails, its injection process will be greatly affected. Therefore, it is necessary to ensure the smoothness of the injection head during use, and to replace the injection head after a period of use. (3. As equipment, there must be parts that need to be lubricated, and the staff must do a good job of lubricating to ensure the smooth operation of the equipment.