Since the Compression molding press is made of metal with high hardness, it is subjected to vibration shock and other compound forces during the production and operation process, resulting in the formation of gaps in the components and causing wear. The storage environment of the vulcanizer should be kept dry and well ventilated to avoid dampness in electrical circuits; traditional repair methods include surfacing, thermal spraying, electric brushing, etc., but several methods have certain drawbacks: surfacing will make the surface of the parts Reaching a very high temperature will cause deformation of parts or cracks, affecting dimensional accuracy and normal use, and even lead to fracture in severe cases; although the brush has no thermal effect, the thickness of the crossing layer should not be too thick, the pollution is serious, and the application has also been extremely affected. big restriction.
Hydraulic system: Using the hydraulic station of well-known brands at home and abroad, under the control of PLC, it can realize automatic: mold clamping, exhaust, mold opening and unloading. Western countries use polymer composite materials to solve the above problems. It has comprehensive performance and can be machined at any time, which can meet the use requirements and precision after repair, and can also reduce the impact and vibration of the equipment during operation and prolong its service life. Because the material is a "variable" relationship, when the external force impacts the material, the material will deform to absorb the external force, and expand and contract with the expansion and contraction of the bearing or other components, and always maintain a tight fit with the components to reduce the probability of wear.
For the wear and tear of large rubber molding press, "mold" or "matching parts" can also be used to repair damaged equipment on site, to avoid the overall disassembly of the equipment, to maximize the matching size of the parts, and to meet the production and operation requirements of the equipment. The correct way to release the water is to carry out the vulcanization machine after the vulcanization and heat preservation is completed and before the vulcanizer is disassembled. If the water is discharged after the machine is disassembled, the water in the water pressure plate may not be completely drained.
Copyright © JAPLAU All Rights Reserved Technical Support: Sitemap