What kind of environment does the rubber press?

The storage environment of the rubber hydraulic press should be kept dry and well ventilated to avoid dampness of the electrical circuit; the surface temperature of the hot plate is uniform, the temperature control is accurate, the temperature controller (see the picture on the right) can accurately record the temperature data, the pressure is stable and reliable, and the operation is safe Convenience and so on. Medium and high-end machines have a short pre-commissioning time for mass production, and the equipment is highly reliable. 99% of the equipment on the market is manufactured on the premise that it can ensure product quality, provide production efficiency, and obtain significant economic benefits. After each use, the water in the hydraulic plate should be cleaned, especially in winter, if the water cannot be cleaned, it will often lead to premature aging of the rubber of the hydraulic plate.

   The service life of the water pressure plate is reduced; if the heating plate enters the water due to improper operation during use, you should first contact the manufacturer for maintenance. If emergency repairs are needed, open the cover on the heating plate, pour out the water first, then set the electric control box to manual operation, heat it to 100°C, keep it at a constant temperature for half an hour, dry the circuit, and put it in the Belt gluing is performed manually. At the same time, the manufacturer should be contacted in time to carry out the overall replacement of the line. After the mold is loaded, it should be placed in the middle of the plate, and the person should stand in the center of the operating table. When the required pressure is reached after the mold is closed, turn off the Rubber molding machine motor. If the requirement is not met, please ask the instructor to adjust it, and do not tamper with it.